ISC-012 Limit Switch Series

ISC-012 Specifications

Characteristic

Operating Characteristic

Double Breck MechanismINO+INC Force Break snap action

Rated Voltage / Current10(4)A,125, 250VAC / 6(2)A, 380VAC For inductance Load, Cos O=0.4

Contact Resistance25m² max.(initial value)

Insultation Resistance100m min. (at 500 VDC)

Dielectric Strength1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity
1500VAC, 50/60 Hz for 1minute between current-carrying and non-current-carrying metal part
1500VAC, 50/60 Hz for 1minute between each terminal and ground

Operating Speed5mm/s to 0.5m/s

Degree of ProtectionIP40

Ambient Temperature RisedMax 30'C over ambient temperature at rated voltage/current

Conformed StandardsCenelec EN 50041, EN 50047, IEC 337-1, VDE 0660

Operating Temperature-5°C -+65°C (with no icing)

Storage Temperature-5°C -+65°C (with no icing)

Ambient Operating Humidity95% RH MAX.

Shock ResistanceMechanical durable: 1000m/s^2 min
Malfunction: 300m/s^2 min

Vibration FrequencyMalfunction: 10 to 55Hz, 1.5mm double amplitude

Terminal Screw Torsional Force6.8 kgf-cm

Other Screw Torsional Screwcover 12-14 kgf-cm/Head 8-9 kgf-cm/Mounting 50-60 kgf-cm

Bare Wire Diameter2 max

Cable Diameter12 max (IP 65 if use cable O8-9)

OF (Max)7.84N

RF (Min)3.92N

PT (Max)1.8mm

TP ± 10%

2.0mm

MD (Max)1.2mm

OT (Min)4.0mm

TT (Min)5.8mm

sequence

Safety Notes

Voltage accuracy= 1%
Parameter setting by keys
LED indicators for different faults
5 Modules 90mm width

Must be installed by a qualified person
Must be installed by a qualified person
Don,t touch any terminals when the power is on
Verify correct terminal connection when wiring
Don,t dismantle or repair the device whe ther it operates normally, otherwise no responsibility is assumed by producer & seller
No invaded by corrode gas, strong sunshine light and rain. Clean the device with a dry cloth. Fail to follow the instructions will result in serious injury or death